home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Night Owl 6
/
Night Owl's Shareware - PDSI-006 - Night Owl Corp (1990).iso
/
031a
/
acce01.zip
/
README.TXT
< prev
next >
Wrap
Text File
|
1991-12-12
|
5KB
|
131 lines
DISCLAIMER - AGREEMEN
TUSERS OF ACCESSES MUST ACCEPT THIS DISCLAIMER OF WARRANTY:
"ACCESSES IS SUPPLIED 'AS IS'. THE AUTHOR DISCLAIMS ALL
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT
LIMITATION,THE WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR
ANY PURPOSE. THE AUTHOR ASSUMES NO LIABILITY FOR DAMAGES, DIRECT
OR CONSEQUENTIAL, WHICH MAY RESULT FROM THE USE OF ACCESSES. IN
ANY CASE THE MAXIMUM LIABILITY OF THE SELLER WILL BE LIMITED
EXCLUSIVELY TO PRODUCT REPLACEMENT OR REFUND OF PURCHASE PRICE."
The ACCE01.ZIP file contains the following program files:
ACCESSES.EXE The main program.
ACCESSES.HLP The help file in Windows
HELP format.
README.TXT This file.
VENDOR.TXT Shareware and Vendor info.
REGISTER.FRM Registration Information.
BETATEST.TXT Required reading for Beta Testers
of Accesses and Windows 3.1
ARCHIVES.TXT required reading for Archives
users.
You MUST Place ACCESSES.EXE and ACCESSES.HLP in the same
directory as the TASKMAN.EXE windows program. You must have
ACCESSES.HLP installed for the installation to work properly.
Accesses creates ACCESSES.INI when Accesses is 1st started if an
ACCESSES.INI doesn't already exist.
Please read at least until you see the asterisk separator. ie:
************ so the INI file is properly setup!
REMEMBER TWO IMPORTANT ITEMS FOR ACCESSES:
1. FILE EXTENSIONS ARE PREFERRED !!!!!
2. You MUST go thru the TUTOR in ACCESSES.HLP
Accesses and Windows 3.1 Beta Testers must read BETATEST.TXT.
Check out the mouse click functions that Accesses has very early
in your testing procedure! Read TUTOR in ACCESSES.HLP for more...
Follow these steps BEFORE LAUNCHING ACCESSES...
During the installation process you will automatically be storing
currently opened window positions to your ACCESSES.INI file. All
of this can be easily edited by Accesses later but it helps to
do some now.
1. Make a backup copy of your WIN.INI file and SYSTEM.INI
files NOW. I do nothing to your WIN.INI file; but hopefully you
will be prefixing most of your [extensions] section of your
WIN.INI file using an Accesses extensions update dialog box
later. I will ask you if I can add taskman.exe=accesses.exe to
your SYSTEM.INI file during the installation. (This change is not
required but speeds the Ctrl+Esc key call to Accesses. If you are
using a remote drive, adding the taskman.exe=accesses.exe line to
your SYSTEM.INI file speeds things up considerably.)
2. open one copy each of 5 or 6 of your most frequently
used programs before running ACCESSES. Open Windows File Manager
(or equivalent) and open the File Manager's 'About' Box (under the
Help menu) and if your 'Free System Resources are greater than
30% open more windows until this number is between 20 to 30%, but
not less than 20%. eg. Open one each of Notepad, Write, Excel,
Winword, Amφ, calculator,..., etc If you're running windows in
the Enhanced Mode, open a DOS window as well and place the DOS
window where you want it to be placed.
3. Close any duplicate programs. For example, Run only one
'Notepad'. If you want to keep a duplicate program open,
minimized the program whose position you do not want to store.
(TUTOR will explain how to save both in a separate procedure
after the installation.)
4. Move these programs to the window positions that you
want them to normally be in when in the 'Restored' (not maximized
and not minimized) positions. USE THE RESTORED POSITION for all
of these WINDOWS.
3. Then launch ACCESSES for the 1st time.
READ TUTOR in Accesses.hlp. This takes 5 minutes...
Do add accesses to your WIN.INI extensions using Accesses'
Setup+Configure - Update WIN.INI extensions.
****************************************
Accesses does everything I could think of to help you access,
run, and place your programs where you want them to be. Accesses
can even do this from most other programs!!!! If you think of
something that Accesses should access and don't know how to do
it, call me. Accesses probably can do it now, if you knew how.
******************************************************
I wish you the best computering,
Ted
PS, if you like Accesses, please register it.
I can be contacted at the following:
Address: T. F. Wall
Off the WALL Software
7680 Cottonwood Ln.
Pleasanton, CA 94588-4322 USA
Phone: Charge Cards cannot yet be accepted.
Registered users can call for product support, improvements and
others can make inquiries at the following:
510-484-4129 8am - 6pm (Pacific Time)
Site License agreements can be negotiated.
I can be contacted on CompuServe; although, I currently access
this system on a weekly basis.
COMPUSERVE ID 73747,1563
The latest version of ACCESSES and ARCHIVES can be found on the
CompuServe WINADV forum.